Remove all the rocker shaft mounting bolts and nut from the front or rear rocker shaft assembly. If equipped with Jake Brakes remove the Jake Brake assembly.ħ. Clean and remove the rocker cover, it is not necessary to remove the bottom rocker cover. To 30 seconds or until all the fuel is purged from the head.Ħ. Disconnect the fuel return line from the doser valve and place a suitable container under the line to catch the spilled fuel.ĥ.Blow low pressure regulated air no more than 207 kPa (30 psi ) into the inlet fitting for 20 Place a suitable container under the line to catch the spilled fuel. Disconnect the fuel supply line to the cylinder head. Turn the 1⁄4 turn valve off on the outlet fitting of the secondary fuel filter.Ĥ. Place a suitable container under the line to catch the spilling fuel. Disconnect the fuel pump feed line from the fuel tank. Perform the following steps for a compression test on a Series 60 Engine:ġ.Start and run the engine until normal operating temperature is reached.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |